Price your fence
Six quick steps. Your price range updates as you go, and you never have to give your email to see it.
The fence cost calculator needs JavaScript. You can still get a free, exact quote from our team:
Your estimate
$ –
Add your footage and choose a material to see a price range.
| Fence | |
|---|---|
| Gates | |
| Extras |
Includes our minimum job charge.
Estimate only. Your final price is confirmed after a free on-site measurement.
Compare materials
| Material | Price range | Action |
|---|
How to use the fence cost calculator
- Enter the length. Type the total feet of fence, add up each side, or use our Yard Measuring Tool to trace your fence line on a satellite map.
- Pick a material, style and height. Only the heights we install for each style are shown, so every combination you can choose is one we can build.
- Add gates and extras. Count your walk gates and drive gates, and tell us whether the old fence needs to come out and how sloped the yard is.
- Read your range. The price updates as you go. You also see the same fence priced in every other material, so you can compare without starting over.
You never have to give your email to see a price. When the range looks right, send us the project and we will confirm the exact number with a free on-site measurement, or book an in-person estimate right away.
What drives the cost of a fence
Length. Most of the price is per foot of fence, so footage matters more than anything else. A typical back yard in a metro Atlanta subdivision runs somewhere between 150 and 300 feet, but lots vary a lot, and corner lots and wooded acreage can run much longer.
Material. Chain link costs the least per foot. Wood is the most popular way to get full privacy on a budget. Vinyl, aluminum and ornamental steel cost more up front but need far less upkeep. Composite sits at the top of the range. If you are not sure which fits your goals, the Fence Finder Quiz narrows it down in six questions.
Height and style. Taller fences use longer posts, more boards and more concrete. Within a material, styles differ too: a shadowbox wood fence uses more boards than a standard privacy fence, and a spear-top aluminum fence costs a little more than a flat top.
Gates. Each gate is a separate, framed piece with its own hinges, latch and heavier posts. A 4 ft walk gate adds the least; a 10 to 12 ft drive gate, and especially a double drive gate, adds more. An automatic opener or keypad is priced separately.
Removing the old fence. Tearing out and hauling away an existing fence is priced per foot.
Slope and site. A sloped fence line takes extra time to step or rack each panel so the fence follows the ground without big gaps. Rocky ground, roots and tight access can add time too. These are the details we confirm on site.
Minimum job. Very short runs have a minimum charge, because every job carries the same setup, permit and travel time.
Fence costs in metro Atlanta and North Georgia
A few things about building fences here affect the price and are worth knowing before you get quotes:
- Red clay and rock. Georgia clay is dense and holds water, and parts of North Georgia have rock just below the surface. Posts set in concrete at the right depth are what keep a fence straight for years.
- Slopes. Many lots from Gwinnett to Forsyth and Barrow counties slope toward the back or side. That is why the calculator asks about slope.
- HOAs. Many subdivisions require approval of the material, height and color before you build. Our HOA Approval Packet builds the request for you.
- Utility locates. Georgia law requires underground utilities to be marked through Georgia 811 before digging post holes.
After you get your range
If the price fits, the next step is a free on-site visit. We measure the fence line, check slope, access and the property line, and give you a written quote. If you would rather pay over time, see your monthly payment with the fence financing calculator.
Frequently asked questions
How accurate is the fence cost calculator?
The range comes from Academy Fence Builders’ current installed pricing for each material, style and height, plus gates and common extras. It is a realistic starting point for planning. Your exact price is confirmed after a free on-site measurement, because slope, soil and access can only be checked in person.
Why is the price shown as a range?
Two fences with the same length and material can still differ in price because of the ground they sit on, how many corners and ends they have, and how easy the site is to reach. The range covers typical jobs. We narrow it to one number after we see your yard.
Does the price include installation?
Yes. Every range is for a fence installed by our crew, including posts set in concrete, materials and labor. Removing an old fence is included only if you select it.
How do I measure my yard for a fence?
Walk the fence line with a measuring wheel or tape and add up each side, or use our Yard Measuring Tool to trace it on a satellite map. Remember to leave out the sides your house or an existing fence already covers.
What is the cheapest type of fence?
Chain link has the lowest cost per foot. For privacy, wood is usually the lowest-cost option. Use the “Compare materials” table under your result to see your own fence priced in every material.
Is it cheaper to share a fence with a neighbor?
It can be. Neighbors often split the cost of the shared section of fence. We are happy to quote the shared run separately so each household can see its share.
Do I need a permit or HOA approval?
Many cities in metro Atlanta require a permit for some fences, and most HOAs require approval before you build. Rules vary by city and neighborhood, so confirm with your city or HOA before you build. We can help with the paperwork.